|Shipping time||1 - 3 Tage**|
for battery operation with 4xAA batteries or power supply 6V DC or solar.
Automatic HK-BAT chicken coop door opener with plug-in power supply and door/sliding gate! The HK-BAT automatic chicken coop door opener from JOSTechnik, which can also be called an automatic actuator or electronic gatekeeper, automatically opens and closes chicken or poultry coop doors or vertical sliding gates via a pull cord according to light or time.
The sensitivity of the light sensor can be set to different levels for light and darkness.
The batteries last about 8 months, depending on the quality and manufacturer. The battery icon in the standard indicator of the display flashes when the charge of the batteries is below 25%. The use of rechargeable batteries is not recommended.
The HK-BAT opens and closes automatic flaps at the poultry and chicken coop, aviary or small animal enclosure by dusk or time or in combination of both.
Real emergency stop or emergency opening function:
If an animal is under the door when it closes, the motor will automatically stop upon contact and the door will open again immediately. The closing operation is then automatically repeated. Unlike with other manufacturers’ products, no animal has to free itself from the weight of the door!
This function can be deactivated in the settings.
The HK-BAT won’t open during a storm (in the case of lightning). 230V /12V DC plug-in power supply (certified for indoor use!).
The following functions can be set on the integrated display:
Date and time:
Operating modes for opening and closing, the combinations between twilight sensor and timer.
Trailing for self-locking flaps:
If the unit is installed indoors or if the installation location is shaded, an external outdoor light sensor is required. For wall mounting, only use the 4 pre-drilled openings in the corners of the housing, each next to the cover fastening.
This prevents moisture from getting into the enclosure.
The cable between the fastening nut and the motor rewind must be guided vertically out of the enclosure to the flap or a pulley. Diagonal pull must be avoided.
The connecting cable between the flap actuator and the flap is not included in the scope of delivery, except for the frame unit.
Scope of delivery
Due to the manufacturing process, there may be slight scratches on the aluminium parts of the flaps, which do not impair the functionality and therefore do not represent a defect!
3rd generation of self-sufficient automatic flap regulators - even better, more functions and safety features! There is no comparable device!